TROUBLESHOOTING INDEX [BLIND SPOT MONITORING (BSM) SYSTEM (Australian specs.)]
id1503b2013100
|
No. |
Troubleshooting item |
Description |
|---|---|---|
|
1
|
• The blind spot monitoring (BSM) OFF indicator light does not illuminate when the ignition is switched to ON.
• The blind spot monitoring (BSM) control module does not communicate with the M-MDS.
|
|
|
2
|
• The blind spot monitoring (BSM) warning light does not illuminate after the blind spot monitoring (BSM) switch turns off the system when the ignition is switched to ON.
|
|
|
3
|
• The blind spot monitoring (BSM) OFF indicator light illuminates for 4 s or more without the blind spot monitoring (BSM) switch turning off the system when the ignition is switched to ON.
|
|
|
4
|
• The blind spot monitoring (BSM) warning light illuminates, but the conditions to illuminate the blind spot monitoring (BSM) warning light are not satisfied (vehicle speed above 32 km/h {20 mph} or more, turn signals off, and vehicle in warning zone).
|
|
|
5
|
• The blind spot monitoring (BSM) warning light does not illuminate despite satisfying the conditions to illuminate the blind spot monitoring (BSM) warning light (vehicle speed above 32 km/h {20 mph} or more, turn signals off, and vehicle in warning zone).
|
|
|
6
|
• The blind spot monitoring (BSM) warning light flashes despite not satisfying the blind spot monitoring (BSM) warning light flashing conditions (vehicle speed above 32 km/h {20 mph} or more, turn signal on, and vehicle in warning zone).
• The blind spot monitoring (BSM) warning light flashes, but the turn signals are off.
|
|
|
7
|
• The blind spot monitoring (BSM) warning light does not flash or illuminate continuously, but the conditions to flash the blind spot monitoring (BSM) warning light are satisfied (vehicle speed above 32 km/h {20 mph} or more, turn signal on, and vehicle in warning zone).
|
|
|
8
|
• Blind spot monitoring (BSM) warning alarm sounds but blind spot monitoring (BSM) warning light does not flash.
• The blind spot monitoring (BSM) warning alarm is triggered on the side opposite to the direction in which the turn signal is operated.
• The M-MDS is communicating with only the left or right blind spot monitoring (BSM) control module.
|
|
|
9
|
• The RCTA indicator light flashes under conditions other than the RCTA indicator light flashing conditions (R position (ATX)/R gear (MTX), and target vehicle detection).
|
|
|
10
|
• The RCTA indicator light does not flash even though under RCTA indicator light flash conditions (R position (ATX)/R gear (MTX), and target vehicle detection).
|
|
|
11
|
• The blind spot monitoring (BSM) control module recognizes that a vehicle is in the warning zone on the side in which the turn signal is operated, but the blind spot monitoring (BSM) warning alarm does not sound despite the blind spot monitoring (BSM) warning light flashing.
|
|
|
12
|
• The blind spot monitoring (BSM) system cannot detect vehicle.
|