SECONDARY GEAR AND OUTPUT GEAR INSPECTION

id051700662300

Taper Roller Bearing Inspection

1.  Place the secondary gear and output gear with the output gear side pointing upward on a workbench.

azzjjw00001279

2.  Assemble the bearing race to the secondary gear and output gear.

Note

•  Bearing race size: Outer diameter approx. 75 mm {3.0 in}

azzjjw00001280

azzjjw00001281

3.  With a load applied by hand to the bearing race, rotate the bearing race and verify that there is no malfunction in the taper roller bearing (rotation sticking).

azzjjw00001282

•  If there is a malfunction, disassemble the secondary gear and output gear and replace the taper roller bearing with a new one.

(See SECONDARY GEAR AND OUTPUT GEAR DISASSEMBLY.)

(See SECONDARY GEAR AND OUTPUT GEAR ASSEMBLY.)

4.  Remove the bearing race.

azzjjw00001283

5.  Place the secondary gear and output gear with the output gear side pointing downward on a workbench.

azzjjw00001284

6.  Assemble the bearing race to the secondary gear and output gear.

Note

•  Bearing race size: Outer diameter approx. 70 mm {2.8 in}

azzjjw00001285

bfw2za00000605

7.  With a load applied by hand to the bearing race, rotate the bearing race and verify that there is no malfunction in the taper roller bearing (rotation sticking).

bfw2za00000606

•  If there is a malfunction, disassemble the secondary gear and output gear and replace the taper roller bearing with a new one.

(See SECONDARY GEAR AND OUTPUT GEAR DISASSEMBLY.)

(See SECONDARY GEAR AND OUTPUT GEAR ASSEMBLY.)

8.  Remove the bearing race.

azzjjw00001288