NO.2 MIL ILLUMINATES [MZR 2.3 DISI Turbo]

id0103e2800800

2

MIL ILLUMINATES

DESCRIPTION

•  MIL is illuminated incorrectly.

POSSIBLE CAUSE

•  MIL illuminates for emission-related concern (DTC is stored in PCM)

•  Instrument cluster malfunction

Note

•  If the MIL blinks at a steady rate, a misfire condition could possibly exist.

2	MIL ILLUMINATES
DESCRIPTION	• MIL is illuminated incorrectly.
POSSIBLE CAUSE	• MIL illuminates for emission-related concern (DTC is stored in PCM) • Instrument cluster malfunction Note • If the MIL blinks at a steady rate, a misfire condition could possibly exist.

Diagnostic procedure

STEP	INSPECTION	RESULTS	ACTION
1	Switch the ignition to ON. Retrieve any DTCs using the M-MDS. (See ON-BOARD DIAGNOSTIC TEST [MZR 2.3 DISI Turbo].) Are any DTCs present?	Yes	Go to the applicable DTC inspection. (See DTC TABLE [MZR 2.3 DISI Turbo].)
1		No	Inspect the instrument cluster. (See INSTRUMENT CLUSTER INSPECTION.) Repair or replace the malfunctioning part according to the inspection results.
2	Verify test results. • If normal, return to the diagnostic index to service any additional symptoms. • If a malfunction remains, inspect the related Service Information and perform the repair or diagnosis. ― If the vehicle is repaired, troubleshooting is completed. ― If the vehicle is not repaired or additional diagnostic information is not available, reprogram the PCM if a later calibration is available. Retest.