VARIABLE SWIRL SOLENOID VALVE INSPECTION [MZR 2.0 DISI i-stop]

id0113b8801100

Airflow Inspection

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

3.  Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

4.  Remove the variable swirl solenoid valve. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

5.  Inspect airflow between the ports under the following conditions.

am6xuw00000453

am3zzw00012008

•  If not as specified, replace the variable swirl solenoid valve. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)