FUEL PUMP UNIT INSPECTION [MZR 2.0, MZR 2.5]

id0114d8801100

Continuity Inspection

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)

3.  Disconnect the fuel pump unit connector.

4.  Inspect for continuity between fuel pump unit terminals A—E.

am3uuw00003287

•  If there is no continuity, replace the fuel pump unit. (See FUEL PUMP UNIT REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)