BEFORE SERVICE PRECAUTION [MZR 2.0, MZR 2.5]

id0114d8802000

Warning

•  Fuel vapor is hazardous. It can very easily ignite, causing serious injury and damage. Always keep sparks and flames away from fuel.

•  Fuel line spills and leakage from the pressurized fuel system are dangerous. Fuel can ignite and cause serious injury or death and damage. Fuel can also irritate skin and eyes. To prevent this, always complete the “Fuel Line Safety Procedure”.

•  A person charged with static electricity could cause a fire or explosion, resulting in death or serious injury. Before performing work on the fuel system, discharge static electricity by touching the vehicle body.

Fuel Line Safety Procedure

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5],)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5],)

3.  Remove the fuel-filler cap to release the pressure inside the fuel tank.

4.  Remove the fuel pump relay.

am3zzw00012066

5.  Connect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5],)

6.  Start the engine.

7.  After the engine stalls, crank the engine 3—4 times.

8.  Switch the ignition to off.

9.  Install the fuel pump relay.