IGNITION COIL REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5]


id011805800200

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)

3.  Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)

4.  Remove in the order indicated in the table.

5.  Install in the reverse order of removal.

am6zzw00003768

1
Plug hole plate bracket
2
Connector
3
Ignition coil