STARTER INTERLOCK SWITCH INSPECTION [MZR 2.0, MZR 2.5]

id011909104200

Caution

•  Do not reuse the starter interlock switch if it is removed from the vehicle even once. Replace with a new starter interlock switch when installing.

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)

3.  Disconnect the starter interlock switch connector.

4.  Verify that the continuity is as indicated in the table using a tester.

am6zzw00002367

am6xuw00002340

•  If the continuity is not as indicated in the table, replace the starter interlock switch.

(See CLUTCH PEDAL REMOVAL/INSTALLATION.)