KNOCK SENSOR (KS) INSPECTION [MZR 1.5, MZR 1.6]

id014068802800

Resistance Inspection

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].)

3.  Disconnect the KS connector.

4.  Measure the resistance between KS terminal A and body ground.

•  If not as specified, replace the KS. (See KNOCK SENSOR (KS) REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].)

am3zzw00011564