CURRENT SENSOR INSPECTION [MZR 1.5, MZR 1.6]

id014068805300

Voltage Inspection

1.  Connect the M-MDS to the DLC-2.

am3zzw00011568

2.  Switch the ignition to ON.

3.  Verify that the current sensor output voltage (PID: ALT_CUR_S) is within the specification. (See ON-BOARD DIAGNOSTIC TEST [MZR 1.5, MZR 1.6].) (See PCM INSPECTION [MZR 1.5, MZR 1.6].)

•  If not as specified, replace the current sensor.

(See CURRENT SENSOR REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].)