KNOCK SENSOR (KS) INSPECTION [MZR 2.0, MZR 2.5]


id0140e4802800


Resistance Inspection

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)

3.  Disconnect the KS connector.

4.  Measure the resistance between KS terminals A and B.

•  If not as specified, replace the KS. (See KNOCK SENSOR (KS) REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)
am3zzw00011831
Specification
Approx. 4.87 megohms [normal temperature]