KNOCK SENSOR (KS) INSPECTION [MZR 2.3 DISI Turbo]

id0140e5802800

Resistance Inspection

Caution

•  Be careful not to impact the sensor.

•  Verify that there is no debris between the sensor and the cylinder block before installing.

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].)

3.  Disconnect the KS connector.

4.  Measure the resistance between KS terminals A and B.

am3zzw00011795

•  If not as specified, replace the KS. (See KNOCK SENSOR (KS) REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].)