i-stop OFF SWITCH INSPECTION [SKYACTIV-G 2.0]

id0140f4888900

Continuity Inspection

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

3.  Remove the i-stop OFF switch. (See i-stop OFF SWITCH REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

4.  Inspect for continuity between i-stop OFF switch terminals I and G.

am3zzw00012585

•  If as specified, go to the next step.

•  If not as specified, replace the i-stop OFF switch. (See i-stop OFF SWITCH REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

5.  Apply battery positive voltage to i-stop OFF switch terminal E, and terminal A to ground.

6.  Verify that the LED illuminates.

•  If the LED does not illuminate, replace the i-stop OFF switch. (See i-stop OFF SWITCH REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)