POWER BRAKE UNIT VACUUM SENSOR INSPECTION [SKYACTIV-G 2.0]

id0140f4889400

Voltage Inspection

1.  Connect the M-MDS to the DLC-2.

am3zzw00012689

2.  Switch the ignition to ON.

3.  Verify that the power brake unit vacuum sensor output voltage (PID: BBP) is within the specification. (See ON-BOARD DIAGNOSTIC TEST [SKYACTIV-G 2.0].) (See PCM INSPECTION [SKYACTIV-G 2.0].)

•  If not as specified, replace the power brake unit vacuum sensor. (See POWER BRAKE UNIT REMOVAL/INSTALLATION (R.H.D.) [SKYACTIV-G 2.0].)

Specification

am3zzw00012584