AIR FUEL RATIO (A/F) SENSOR REMOVAL/INSTALLATION [SKYACTIV-G 2.0]

id0140f4899700

Warning

•  A hot engine and exhaust system can cause severe burns. Turn off the engine and wait until they are cool before removing the exhaust system.

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

3.  Disconnect the A/F sensor connector.

4.  Remove the wiring harness from the wire clip. (See Assembly of Wiring Harness to Wire Clip Note.)

am3uuw00007250

5.  Remove the A/F sensor using the SST.

am3uuw00007251

6.  Install in the reverse order of removal.

Assembly of Wiring Harness to Wire Clip Note

•  Secure the wiring harness to the wire clip so that the band on the wiring harness is positioned to the right side of the wire clip.

am3uuw00007252