KNOCK SENSOR (KS) INSPECTION [MZR 2.0 DISI i-stop]

id0140j1802800

Resistance Inspection

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

3.  Disconnect the KS connector.

4.  Measure the resistance between KS terminals A and B.

am3zzw00011885

•  If not as specified, replace the KS. (See KNOCK SENSOR (KS) REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)