KNOCK SENSOR (KS) REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop]

id0140j1802900

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

3.  Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

4.  Remove the intake manifold. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

5.  Disconnect the KS connector.

6.  Remove the KS.

am3zzw00011886

7.  Install in the reverse order of removal.