TRANSAXLE OIL INSPECTION [G66M-R]

id0515k1800000

1. Park the vehicle on level ground.

2. Remove the aerodynamic under cover No.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)

3. Remove the oil level plug and washer.

4. Verify that the oil is near the brim of the plug port.

am3uuw00002128

• If the oil level is lower than the low level, add the specified amount and type of oil through the oil level plug hole.

Manual transaxle oil Grade

API service GL-4

Manual transaxle oil Viscosity

SAE 75W-80

5. Install a new washer and the oil level plug.

Tightening torque

39—59 N·m {4.0—6.0 kgf·m, 29—43 ft·lbf}

6. Install the aerodynamic under cover No.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)