AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT [FS5A-EL]
id051721290900
-
Warning
-
• A hot transaxle and ATF can cause severe burns. Turn off the engine and wait until they are cool before changing the ATF.
1. Drain the ATF.
- (1) Remove the oil dipstick.
- (2) Remove the aerodynamic under cover NO.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)
- (3) Remove the drain plug and washer to drain the ATF into a container.
-
2. Add the ATF.
- (1) Install a new washer and the drain plug.
-
-
Tightening torque
-
30—41 N·m {3.1—4.1 kgf·m, 23—30 ft·lbf}
- (2) Add the specified ATF through the oil filler tube.
-
-
ATF Type
-
ATF M-V
-
ATF Capacity (Reference)
-
Draining ATF from drain plug: 3.0 L {3.2 US qt, 2.6 lmp qt}
Overhauling transaxle: 5.0 L {5.3 US qt, 4.4 lmp qt}
3. Install the aerodynamic under cover NO.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)
4. Install the oil dipstick.
5. Inspect the ATF level. (See AUTOMATIC TRANSAXLE FLUID (ATF) INSPECTION [FS5A-EL].)