INTERMEDIATE SENSOR REMOVAL/INSTALLATION [FS5A-EL]

id051721292800

Caution

•  If foreign materials are stuck to the sensor, disturbance by magnetic flux can cause sensor output to be abnormal and thereby negatively affect control. Make sure that foreign materials such as iron filings are not stuck to the sensor during installation.

1.  Perform the following procedures.

(1)  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)

(2)  Disconnect the negative battery cable.

(3)  Remove the battery. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)

(4)  Remove the battery box. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)

(5)  Remove the battery tray. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)

2.  Remove in the order indicated in the table.

am8rrw00002455

1	Connector
2	Intermediate sensor
3	O-ring

3.  Install in the reverse order of removal.