TCM REMOVAL/INSTALLATION [FS5A-EL]

id051721294000

Caution

•  Do not apply a shock to or touch the projection on the TCM, otherwise it may not operate normally.

1.  Perform the following procedures.

(1)  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)

(2)  Disconnect the negative battery cable.

(3)  Remove the battery . (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)

(4)  Remove the battery box. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)

(5)  Remove the battery tray. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)

2.  Remove in the order indicated in the table.

am3uuw00002452

1	Connector
2	TCM

3.  Install in the reverse order of removal.