DTC 6/DTC B1041:54 [AFS (ADAPTIVE FRONT LIGHTING SYSTEM)]

id0902g9980000

DESCRIPTION

Headlight auto leveling system initialization error
DETECTION CONDITION
•  AFS control module detects the headlight auto leveling system initialization error. (DTC 6)
•  Headlight auto leveling system initialization has not been completed. (DTC B1041:54)
POSSIBLE CAUSE
•  Headlight auto leveling system initialization error
•  AFS control module malfunction

Diagnostic Procedure

STEP

INSPECTION

ACTION
1
PERFORM HEADLIGHT AUTO LEVELING SYSTEM INITIALIZATION
•  Perform the “HEADLIGHT AUTO LEVELING SYSTEM INITIALIZATION”.
•  Clear the DTC from the AFS control module using the M-MDS.
•  Perform the AFS control module DTC inspection using the M-MDS.
•  Is the same DTC present?
Yes
Perform the “HEADLIGHT AUTO LEVELING SYSTEM INITIALIZATION” again, then go to the next step.
(See HEADLIGHT AUTO LEVELING SYSTEM INITIALIZATION.)
No
Go to Step 3.
2
VERIFY TROUBLESHOOTING COMPLETED
•  Clear the DTC from the AFS control module using the M-MDS.
•  Perform the AFS control module DTC inspection using the M-MDS.
•  Is the same DTC present?
Yes
Replace the AFS control module, then go to the next step.
(See AFS (ADAPTIVE FRONT LIGHTING SYSTEM) CONTROL MODULE REMOVAL/INSTALLATION.)
No
Go to the next step.
3
VERIFY THAT NO OTHER DTCs ARE PRESENT
•  Are any DTCs present?
Yes
Go to the applicable DTC inspection.
(See DTC TABLE [AFS (ADAPTIVE FRONT LIGHTING SYSTEM)].)
No
DTC troubleshooting completed.