MRCC WARNING LIGHT (AMBER) IS NOT ILLUMINATED [VEHICLE CONTROL MODULE (V/C-MODULE)]


id0103g5010000

Description
MRCC WARNING LIGHT (AMBER) IS NOT ILLUMINATED
•  The MRCC warning light (amber) is not illuminated when the ignition is switched ON (engine off or on).
Possible Causes
•  The instrument cluster cannot illuminate the MRCC warning light (amber).
―  Instrument cluster malfunction (malfunction in MRCC warning light (amber) illumination circuit)
―  Connector connection malfunction
•  Vehicle control module cannot illuminate the MRCC warning light (amber).
―  Connector connection malfunction
―  Vehicle control module malfunction

Diagnostic Procedure

Step

Inspection

Action

1
VERIFY INSTRUMENT CLUSTER CONNECTOR CONDITION
•  Disconnect the instrument cluster connector.
•  Inspect the connector engagement and connection condition and inspect the terminals for damage, deformation, corrosion, or disconnection.
•  Is the connector normal?
Yes
Go to the next step.
No
Repair or replace the connector.
2
INSPECT INSTRUMENT CLUSTER
•  Turn off the MRCC warning light (amber) using the M-MDS instrument cluster active command modes WL+IL.
•  Are all the warning lights turned on/off?
Yes
Go to the next step.
No
Replace the instrument cluster.
3
VERIFY VEHICLE CONTROL MODULE CONNECTOR CONDITION
•  Disconnect the vehicle control module connector.
•  Inspect the connector engagement and connection condition and inspect the terminals for damage, deformation, corrosion, or disconnection.
•  Is the connector normal?
Yes
Go to the next step.
No
Repair or replace the connector.
4
INSPECT VEHICLE CONTROL MODULE
•  Is the vehicle control module normal?
Yes
Symptom troubleshooting is completed.
No
Replace the vehicle control module.