SYSTEM SCREEN IS NOT DISPLAYED IN ACTIVE DRIVING DISPLAY / ACTIVE DRIVING DISPLAY IS UNMATCHED [VEHICLE CONTROL MODULE (V/C-MODULE)]


id0103g5010700

Description
SYSTEM SCREEN IS NOT DISPLAYED IN ACTIVE DRIVING DISPLAY / ACTIVE DRIVING DISPLAY IS UNMATCHED
•  The system screen is displayed in the active driving display even if the system is operated.
•  The display in the active driving display is unmatched with the system operation.
Possible Causes
•  All or some of the active driving display cannot be displayed
―  active driving display malfunction
―  Connector connection malfunction
•  Vehicle control module output false signal
―  False signal input from steering switch/cruise control switch
―  Vehicle control module malfunction

Diagnostic Procedure

Step

Inspection

Action

1
INSPECT ACTIVE DRIVING DISPLAY
•  Inspect the active driving display.
•  Is the active driving display normal?
Yes
Go to the next step.
No
Replace the active driving display.
2
VERIFY INSTRUMENT CLUSTER CONNECTOR CONDITION
•  Disconnect the instrument cluster connector.
•  Inspect the connector engagement and connection condition and inspect the terminals for damage, deformation, corrosion, or disconnection.
•  Is the connector normal?
Yes
Go to the next step.
No
Repair or replace the connector.
3
INSPECT STEERING SWITCH/CRUISE CONTROL SWITCH
•  Inspect the steering switch/cruise control switch.
•  Is the steering switch/cruise control switch normal?
Yes
Go to the next step.
No
Replace the steering switch/cruise control switch.
4
INSPECT VEHICLE CONTROL MODULE
•  Is the vehicle control module normal?
Yes
Symptom troubleshooting is completed.
No
Replace the vehicle control module.