RADIATOR GRILLE REMOVAL/INSTALLATION


id091600468000

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)

2.  Remove the set plate. (See SET PLATE REMOVAL/INSTALLATION.)

3.  Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION.)

4.  Remove the front ultrasonic sensor from the radiator grille. (with parking sensor system) (See REAR ULTRASONIC SENSOR REMOVAL/INSTALLATION.)

5.  Disconnect the headlight cleaner hose from the radiator grille. (with headlight cleaner system) (See HEADLIGHT CLEANER HOSE REMOVAL/INSTALLATION.)

6.  Remove the locator pin brackets. (See FRONT BUMPER DISASSEMBLY/ASSEMBLY.)

7.  Remove the fasteners shown in the figure.

am3uuw00011734

8.  Detach the hooks of the front bumper fascia and remove the radiator grille.

am3uuw00011735

9.  Install in the reverse order of removal.