FRONT BUMPER DISASSEMBLY/ASSEMBLY
id091000800400
1. Remove the front fog light bezel No.1. (with front fog lights) (See FRONT FOG LIGHT BEZEL REMOVAL/INSTALLATION.)
2. Remove the front fog lights. (with front fog lights) (See FRONT FOG LIGHT REMOVAL/INSTALLATION.)
3. Remove the headlight cleaner hose. (with headlight cleaner system) (See HEADLIGHT CLEANER HOSE REMOVAL/INSTALLATION.)
4. Remove the headlight cleaner cover. (with headlight cleaner system) (See HEADLIGHT CLEANER COVER REMOVAL/INSTALLATION.)
5. Remove the headlight cleaner actuator. (with headlight cleaner system) (See HEADLIGHT CLEANER ACTUATOR REMOVAL/INSTALLATION.)
6. Remove the front ultrasonic sensor short-cord. (with parking sensor system) (See FRONT ULTRASONIC SENSOR SHORT-CORD REMOVAL/INSTALLATION.)
7. Remove the front ultrasonic sensor. (with parking sensor system) (See FRONT ULTRASONIC SENSOR REMOVAL/INSTALLATION.)
8. Disassemble in the order indicated in the table.
am3zzw00014605
|
1
|
Locator pin
|
2
|
Locator pin bracket
|
3
|
Radiator grille (See RADIATOR GRILLE REMOVAL/INSTALLATION.)
|
4
|
Front turn lamp
|
5
|
Bracket
|
6
|
Towing hook cover
|
7
|
Front bumper cover
|
8
|
Hole cover (without front fog lights)
|
9
|
Front bumper face
|
9. Assemble in the reverse order of disassembly.
10. If a front fog light is removed from the front bumper, perform the front fog light aiming. (with front fog lights) (See FRONT FOG LIGHT AIMING.)