PCM REMOVAL/INSTALLATION [ZY, Z6]

Note

• The PCM is integrated with the air cleaner cover and cannot be removed.

1. When replacing the PCM, perform the following:

• PCM configuration (See PCM CONFIGURATION [ZY, Z6].)

2. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [ZY, Z6].)

3. Disconnect the negative battery cable.

4. Remove the air cleaner cover. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [ZY, Z6].)

5. When replacing the PCM on the vehicles, perform the following:

• PCM parameter reset (See IMMOBILIZER SYSTEM COMPONENT REPLACEMENT/KEY ADDITION AND CLEARING.)

6. Install in the reverse order of removal.