VEHICLE SPEED SENSOR REMOVAL/INSTALLATION (WITHOUT ABS) [G35M-R]

1. Disconnect the negative battery cable.

2. Remove the air cleaner component, battery and battery tray.

(See BATTERY REMOVAL/INSTALLATION [LF, L3].)

3. Disconnect the vehicle speed sensor connector.

4. Remove the vehicle speed sensor.

5. Apply transaxle oil to a new O-ring and install it on a new vehicle speed sensor.

6. Install the vehicle speed sensor.

Tightening torque

7.9-11.2 N·m {80-115 kgf·cm, 69.5-99.8 in·lbf}

7. Connect the vehicle speed sensor connector.

8. Install the battery and battery tray.

(See BATTERY REMOVAL/INSTALLATION [LF, L3].)

9. Connect the negative battery cable.