|
DTC B1317
|
Battery voltage high
|
|---|---|
|
DETECTION CONDITION |
Input voltage from the battery is excessively high
|
|
POSSIBLE CAUSE |
• Battery malfunction
• Generator malfunction
• PJB malfunction
|
Diagnostic procedure
|
STEP
|
INSPECTION
|
ACTION
|
|
|---|---|---|---|
|
1
|
INSPECT DTC FROM PCM
• Connect the WDS or equivalent to the DLC-2.
• Are any DTCs from the PCM displayed?
|
Yes
|
Perform DTC inspection.
(See DTC TABLE [LF, L3].)
(See DTC TABLE [ZY, Z6].)
Go to the next step.
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY TROUBLESHOOTING COMPLETED
• Make sure to reconnect all disconnected connectors.
• Clear the DTC from the PJB memory using the WDS or equivalent.
• Turn the ignition switch to LOCK position then ON position.
• Is the same DTC present?
|
Yes
|
Replace the PJB.
|
|
No
|
DTC troubleshooting completed.
|
||