FRONT FENDER PANEL REMOVAL/INSTALLATION
id091000405900
1. Disconnect the negative battery cable.
2. Remove the following parts:
-
(1) Windshield wiper arm and blade (See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION.)
-
(2) Cowl grille (See COWL GRILLE REMOVAL/INSTALLATION.)
-
(3) Front side turn lights (See FRONT SIDE TURN LIGHT REMOVAL/INSTALLATION.)
-
(4) Front bumper (See FRONT BUMPER REMOVAL/INSTALLATION.)
-
(5) Front combination lights (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION.)
-
(6) Side step molding (Vehicle with the side step molding) (See SIDE STEP MOLDING REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.
|
1
|
Fastener
|
|
2
|
Bolt A
|
|
3
|
Bolt B
|
|
4
|
Bolt C
|
|
5
|
Bolt D
|
|
6
|
Front fender panel
|
4. Install in the reverse order of removal.
