1. Disconnect the negative battery cable.
2. Detach the bonnet release lever from the lower panel. (SeeBONNET LATCH AND RELEASE LEVER REMOVAL/INSTALLATION.)
3. Remove the front scuff plate. (Driver's side) (SeeFRONT SCUFF PLATE REMOVAL/INSTALLATION.)
4. Remove the front side trim. (Driver's side) (SeeFRONT SIDE TRIM REMOVAL/INSTALLATION.)
5. Remove the screw.
6. Pull the lower panel outward, and detach clips A and tab.
7. Disconnect the panel light control switch connector, the headlight leveling switch connector and the DSC OFF switch connector.
8. Remove the lower panel.
9. Install in the reverse order of removal.