DRIVE BELT REMOVAL/INSTALLATION [MZR 1.8, MZR 2.0, MZR 2.5]

id011005801600

1.  Set the front mudguard (RH) out of the way. (See FRONT MUDGUARD REMOVAL/INSTALLATION.)

2.  Remove the splash shield (RH). (See SPLASH SHIELD REMOVAL/INSTALLATION.)

3.  Rotate the drive belt auto tensioner in the direction shown in the figure and remove the drive belt.

am6zzw00005147

4.  Install the drive belt.

5.  Verify that the drive belt auto tensioner indicator mark does not exceed the limit. (See DRIVE BELT INSPECTION [MZR 1.8, MZR 2.0, MZR 2.5].)

6.  Install the splash shield (RH). (See SPLASH SHIELD REMOVAL/INSTALLATION.)

7.  Install the front mudguard (RH). (See FRONT MUDGUARD REMOVAL/INSTALLATION.)