VARIABLE INTAKE AIR SOLENOID VALVE INSPECTION [MZR 2.0 DISI]

id0113d4802800

Airflow Inspection

1.  Disconnect the negative battery cable.

2.  Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [MZR 2.0 DISI].)

3.  Remove the variable intake air solenoid valve. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZR 2.0 DISI].)

4.  Inspect airflow between the ports under the following conditions.

am6xuw00000451

aprjjw00002815

•  If not as specified, replace the variable intake air solenoid valve. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZR 2.0 DISI].)