FUEL INJECTOR INSPECTION [MZR 1.8, MZR 2.0, MZR 2.5]

id0114d3800700


Resistance Inspection

1.  Disconnect the negative battery cable.

2.  Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [MZR 1.8, MZR 2.0, MZR 2.5].)

3.  Disconnect the fuel injector connector.

4.  Inspect the resistance between fuel injector terminals A and B.

Fuel injector resistance
11.4—12.6 ohms [20 °C {68 °F}]
am6zzw00005696
•  If not within the specification, replace the fuel injector. (See FUEL INJECTOR REMOVAL/INSTALLATION [MZR 1.8, MZR 2.0, MZR 2.5].)