PURGE SOLENOID VALVE REMOVAL/INSTALLATION [MZR 2.0 DISI]
id0116d4804300
1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI].)
2. Remove the purge solenoid valve component from the air hose.
3. Remove in the order indicated in the table.
am6zzw00007362
|
1
|
Connector
|
2
|
Evaporative hose
|
3
|
Purge solenoid valve
|
4
|
Bracket
|
4. Install in the reverse order of removal.
Evaporative Hose Installation Note
1. Attach the evaporative hose onto the purge solenoid valve until it contacts the stopper.