IGNITION COIL REMOVAL/INSTALLATION [MZR 1.8, MZR 2.0, MZR 2.5]

id0118c6800200

1.  Disconnect the negative battery cable.

2.  Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [MZR 1.8, MZR 2.0, MZR 2.5].)

3.  Remove in the order indicated in the table.

4.  Install in the reverse order of removal.

am6zzw00003768

1	Plug hole plate bracket
2	Connector
3	Ignition coil