KNOCK SENSOR (KS) INSPECTION [MZR 1.8, MZR 2.0, MZR 2.5]

id0140d7802800

1.  Disconnect the negative battery cable.

2.  Disconnect the KS connector.

3.  Measure the resistance between the KS terminals A and B using an ohmmeter.

•  If not as specified, replace the KS. (See KNOCK SENSOR (KS) REMOVAL/INSTALLATION [MZR 1.8, MZR 2.0, MZR 2.5].)

am6zzw00000824