THROTTLE POSITION (TP) SENSOR INSPECTION [MZR 2.0 DISI]

id0140j3802700

Caution

•  The inspection cannot be performed with this method correctly if there is a malfunction of the APP sensor or throttle valve actuator. Verify that no DTCs related to the APP sensor or throttle valve actuator are stored before the inspection.

1.  Connect the M-MDS to the DLC-2.

am3uuw00002395

2.  Switch the ignition to ON.

3.  Verify that the voltage (PID: TP1, TP2) is within the specification. (See PCM INSPECTION [MZR 2.0 DISI].)

•  If not as specified, replace the throttle body.

(See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZR 2.0 DISI].)