DTC U0423:29/U0423:7B [DYNAMIC STABILITY CONTROL (DSC)]
id0402b2881900
|
DTC
|
U0423:29/U0423:7B
|
Brake fluid level sensor
|
|
|
DETECTION CONDITION
|
• U0423:29
• U0423:7B
|
||
|
POSSIBLE CAUSE
|
• Decrease in amount of brake fluid
• Malfunction of brake fluid level sensor
• Malfunction of instrument cluster
• Malfunction of BCM
|
||
Diagnostic procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
INSPECT BRAKE FLUID LEVEL
• Inspect brake fluid level.
• Is it normal?
|
Yes
|
Go to next step.
|
|
No
|
Add brake fluid to specified level, then go to Step 3.
|
||
|
2
|
INSPECT BRAKE FLUID LEVEL SENSOR
• Switch the ignition to off.
• Inspect brake fluid level sensor.
• Is it normal?
|
Yes
|
Go to next step.
|
|
No
|
Repair brake fluid level sensor, then go to Next step.
|
||
|
3
|
INSPECT FOR INSTRUMENT CLUSTER MALFUNCTION
• Using the M-MDS, perform the DTC inspection for the instrument cluster.
• Is there DTC displayed?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY TROUBLESHOOTING COMPLETED
• Make sure to reconnected all disconnected connectors.
• Switch the ignition to ON.
• Is the same DTC present?
|
Yes
|
Replace DSC HU/CM, then go to next step.
|
|
No
|
Go to next step.
|
||
|
5
|
VERIFY THAT NO OTHER DTCS ARE PRESENT
• Are any other DTCs output?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
DTC troubleshooting completed.
|
||