DRIVE PLATE REMOVAL/INSTALLATION [FS5A-EL]
id051721802500
1. Remove the transaxle. (SeeAUTOMATIC TRANSAXLE REMOVAL/INSTALLATION [FS5A-EL].)
2. Remove the drive plate.
- (1) Set the SST or equivalent against the drive plate.
- (2) Remove the drive plate installation bolts in two or three steps in the order shown.
-
- (3) Remove the backing plate.
- (4) Remove the drive plate from the engine.
3. Install the drive plate.
- (1) Set the drive plate and backing plate, then install the new drive plate installation bolts.
- (2) Set the SST or equivalent against the drive plate.
- (3) Tighten the new drive plate installation bolts in two or three steps in the order shown.
-
-
Tightening torque
-
108—116 N·m {11.1—11.8 kgf·m, 80—85 ft·lbf}
4. Install the transaxle. (See AUTOMATIC TRANSAXLE REMOVAL/INSTALLATION [FS5A-EL].)