DTC B1D29:93, B1D30:93, B1D34:68 [WATER HEATER SYSTEM]
id070228730400
|
DTC |
B1D29:93 |
No start, even after restart attempt |
|---|---|---|
|
B1D30:93 |
No start in test mode |
|
|
B1D34:68 |
Heater in lock out mode |
|
|
DETECTION CONDITION
|
• CPU detects malfunction in water heater unit
|
|
|
POSSIBLE CAUSE
|
• Disturbance in the fuel supply
• Blocked air intake or exhaust of the water heater unit
• Water heater unit malfunction
|
|
Diagnostic procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
INSPECT FUEL SUPPLY SYSTEM
• Are there any problems on the fuel lines, or on the fuel supply system? (E.g. blocked fuel line)
|
Yes
|
Replace the fuel supply system, then go to Step 4.
|
|
No
|
Go to the next step.
|
||
|
2
|
INSPECT AIR INTAKE AND EXHAUST SYSTEM
• Are there any problems on the air intake or on the exhaust system? (E.g. blocked air intake, blocked exhaust pipe)
|
Yes
|
Replace the air intake or exhaust system, then go to Step 4.
|
|
No
|
Go to the next step.
|
||
|
3
|
INSPECT WATER HEATER UNIT
• Perform the water heater system operation check.
• Clear DTCs using the M-MDS.
• Perform the water heater unit DTC inspection using the M-MDS.
• Are DTCs B1D29:93, B1D30:93 or B1D34:68 displayed?
|
Yes
|
Replace the water heater unit, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY AFTER REPAIR PROCEDURE
• Perform after repair procedure.
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC troubleshooting.
|
|
No
|
Troubleshooting completed.
|
||