AIRFLOW MODE ACTUATOR REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER]

id0740a1801600

1.  Disconnect the negative battery cable.

2.  Remove the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

3.  Remove the dashboard under cover. (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)

4.  Remove the heat duct. (passenger’s side)

5.  Remove the auto levering control module. (See AUTO LEVELING CONTROL MODULE REMOVAL/INSTALLATION.)

6.  Remove in the order indicated in the table.

L.H.D.

am6zzw00001072

R.H.D.

am6zzw00003502

1	Airflow mode actuator connector
2	Airflow mode actuator set

7.  Install in the reverse order of removal.