DTC TABLE [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)]

id0902e5347100

Note
•  The security light flashes or illuminates under the following conditions when the ignition is switched to off or ACC.
•  There is a malfunction:
―  DTC 16 or below: Flashes for approx. 1 min and the DTC flash pattern indicated in the table below repeats 10 times.
―  DTC 21 or higher: Illuminates for approx. 1 min and the DTC flash pattern indicated in the table below repeats 10 times.
―  If more than one DTC is detected, only the DTC with the lowest number is displayed.
•  There is no malfunction:
―  The security light illuminates for approx. 3 s and then turns off.

—: Not applicable

DTC

Description

Reference

Security light flashing pattern

M-MDS display*

Instrument cluster

PCM
11
B10D9:87
P1260:00
Communication error to coil antenna
(See SECURITY LIGHT: 11, DTC: B10D9:87/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
12
B10D5:13
P1260:00
Coil antenna malfunction
(See SECURITY LIGHT: 12, DTC: B10D5:13/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
13
B10D7:05
P1260:00
Key ID number error
(See SECURITY LIGHT: 13, DTC: B10D7:05/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
B10D7:94
P1260:00
(See SECURITY LIGHT: 13, DTC: B10D7:94/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
14
B10D7:81
P1260:00
Key ID number error
(See SECURITY LIGHT: 14, DTC: B10D7:81/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
15
B10D7:51
P1260:00
Key ID number error
(See SECURITY LIGHT: 15, DTC: B10D7:51/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
16
U0100:87
P1260:00
Communication error to PCM (No response)
(See SECURITY LIGHT: 16, DTC: U0100:87/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
21
B10D8:00
P1260:00
Shortage of programmed key
(See SECURITY LIGHT: 21, DTC: B10D8:00/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
22
B10DA:51
P1260:00
Communication error to PCM (Data transfer failure)
(See SECURITY LIGHT: 22, DTC: B10DA:51/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
23
B10DA:62
P1260:00
Communication error to PCM (Data mis-match)
(See SECURITY LIGHT: 23, DTC: B10DA:62/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
Not illuminated
U0001:88
U0073:00
CAN system communication error (HS-CAN)
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (L.H.D. (EXCEPT MZR-CD 2.2, MZR 2.0 DISI))].)
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D. (EXCEPT MZR-CD 2.2, MZR 2.0 DISI))].)
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (L.H.D. (MZR 2.0 DISI))].)
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D. (MZR 2.0 DISI))].)
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (L.H.D. (MZR-CD 2.2))].)
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D. (MZR-CD 2.2))].)
U0100:00
P0602:00
•  Communication error to PCM
•  PCM programming error
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (L.H.D. (EXCEPT MZR-CD 2.2, MZR 2.0 DISI))].)
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D. (EXCEPT MZR-CD 2.2, MZR 2.0 DISI))].)
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (L.H.D. (MZR 2.0 DISI))].)
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D. (MZR 2.0 DISI))].)
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (L.H.D. (MZR-CD 2.2))].)
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D. (MZR-CD 2.2))].)
(See DTC P0602:00 [MZR 1.8, MZR 2.0, MZR 2.5].)
(See DTC P0602:00 [MZR 2.0 DISI].)
(See DTC P0602:00 [MZR-CD 2.2].)
U3000:41
—
Instrument cluster internal malfunction
(See DTC U3000:41 [INSTRUMENT CLUSTER].)

*  :The letters at the beginning of each DTC are only displayed when using the M-MDS, and refer to the following: B= Body system, P= Powertrain system, U= Network communication system.