DTC U0515:68 [INSTRUMENT CLUSTER]
id0902e8988000
|
DESCRIPTION |
Signal error from keyless control module |
|---|---|
|
DETECTION CONDITION
|
• Instrument cluster cannot receive the correct data from the keyless control module.
|
|
POSSIBLE CAUSE
|
• Keyless control module malfunction
• Instrument cluster malfunction
|
Diagnostic Procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
VERIFY ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM DTCs
• Verify the advanced keyless entry and push button start system DTCs using the M-MDS.
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY KEYLESS CONTROL MODULE MALFUNCTION
• Clear the DTC from the instrument cluster using the M-MDS.
• Switch the ignition to ON and wait for 20 s or more.
• Verify the instrument cluster DTC using the M-MDS.
• Is the same DTC present?
|
Yes
|
Replace the keyless control module, then go to the next step.
|
|
No
|
Go to Step 4.
|
||
|
3
|
VERIFY TROUBLESHOOTING COMPLETED
• Clear the DTC from the instrument cluster using the M-MDS.
• Switch the ignition to ON and wait for 20 s or more.
• Verify the instrument cluster DTC using the M-MDS.
• Is the same DTC present?
|
Yes
|
Replace the instrument cluster, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY THAT NO OTHER DTCs ARE PRESENT
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
DTC troubleshooting completed.
|
||