CLEARING DTC [Bluetooth SYSTEM (HANDS-FREE TELEPHONE (HF/TEL) SYSTEM)]

id0902g8855600

Caution

•  Before clearing the DTCs, be sure to enter all of the DTCs displayed in the DTC inspection in the Audio Repair Order Form.

Audio Unit

With M-MDS

1.  Connect the M-MDS (IDS) to the DLC-2.

am6zzw00006237

2.  After the vehicle is identified, select the following items from the initialization screen of the IDS.

(1)  Select “Self Test”.

(2)  Select “Modules”.

(3)  Select “ACU”.

3.  Verify the DTC according to the directions on the screen.

4.  Press the clear button on the DTC screen to clear the DTC.

5.  Switch the ignition to off.

6.  Switch the ignition to ON and wait for 5 s or more.

7.  Perform DTC inspection. (See DTC INSPECTION [Bluetooth SYSTEM (HANDS-FREE TELEPHONE (HF/TEL) SYSTEM)].)

8.  Verify that no DTCs are displayed.

Without M-MDS (on-board diagnostic test mode)

1.  Launch the DTC inspection. (See DTC INSPECTION [Bluetooth SYSTEM (HANDS-FREE TELEPHONE (HF/TEL) SYSTEM)].)

2.  While pressing the AUTO-M switch, simultaneously press the PRESET 4 switch for 2 s or more.

With RDS (radio data system)

am6zzw00005499

Without RDS (radio data system)

am6zzw00005500

3.  To stop the DTC inspection, ignition is switched to off.

With Car-navigation Unit

1.  Launch the DTC inspection. (See DTC INSPECTION [Bluetooth SYSTEM (HANDS-FREE TELEPHONE (HF/TEL) SYSTEM)].)

2.  While pressing the POWER/VOLUME switch, simultaneously press the DISP switch for 2 s or more.

With RDS (radio data system)

am6zzw00005501

Without RDS (radio data system)

am6zzw00007051

3.  To stop the DTC inspection, ignition is switched to off.