POWER OUTER MIRROR INSPECTION

id091200002700

Mirror Glass Adjustment, Retract/Return

1.  Disconnect the negative battery cable.

2.  Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION.)

3.  Disconnect the power outer mirror connector.

4.  Apply battery positive voltage and connect the ground to the power outer mirror terminals and inspect the power outer mirror operation.

am6zzw00002816

•  If the power outer mirror does not operate as indicated in the table, replace it.

Mirror operation direction	Terminal
	B+	Ground
Up	G	H
Down	H	G
Left	I	H
Right	H	I
Fold	F	D
Unfold	D	F

Heated Outer Mirror

1.  Disconnect the negative battery cable.

2.  Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION.)

3.  Disconnect the power outer mirror connector.

4.  Apply battery voltage to power outer mirror connector terminal A, and connect terminal C to ground.

am6zzw00002817

•  If not as indicated in the table, or if the resistance is not within the specification, replace the power outer mirror.

am6zzw00002818