FRONT SEAT SLIDE ADJUSTER REMOVAL/INSTALLATION

id091300956700

Warning

•  Handling a front seat (with built-in side air bag) improperly can accidentally operate (deploy) the air bag, which may seriously injure you. Read the service warnings before handling a front seat (with built-in side air bag). (See AIR BAG SYSTEM SERVICE WARNINGS.)

Caution

•  After removing a front seat, do not operate the slider lever. If the slider lever is operated, the left and right slide positions will deviate, and the slide adjuster may be damaged after the front seat is installed.

•  Verify that there are no malfunctions in the sliding mechanism after installing a front seat.

•  When performing the procedure with a front seat removed from the vehicle, perform the procedure on a clean rag so as not to damage or soil the seat.

1.  Switch the igniting to off.

2.  Disconnect the negative battery cable and wait 1 min or more.

3.  Remove the following parts:

(1)  Front seat (See FRONT SEAT REMOVAL/INSTALLATION.)

(2)  Front seat side cover (See FRONT SEAT SIDE COVER REMOVAL/INSTALLATION.)

(3)  Front seat cushion (See FRONT SEAT CUSHION TRIM REMOVAL/INSTALLATION.)

(4)  Front seat back component (See FRONT SEAT BACK COMPONENT REMOVAL/INSTALLATION.)

(5)  Position memory control module (Vehicles with power seat system) (See POSITION MEMORY CONTROL MODULE REMOVAL/INSTALLATION.)

4.  Remove the front seat slide adjuster.

5.  Install in the reverse order of removal.