BACK-UP LIGHT SWITCH INSPECTION

id091800800300

1.  Disconnect the negative battery cable.

2.  Remove the battery and battery tray. (G35M-R,G66M-R) (See BATTERY REMOVAL/INSTALLATION [MZR 1.8, MZR 2.0, MZR 2.5].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI].) (See BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2].)

3.  Remove the aerodynamic under cover No.2. (A26M-R) (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)

4.  Disconnect the back-up light switch connector.

5.  Verify that the continuity between the back-up light switch terminals is as indicated in the table.

am6zzw00006977

•  If not as indicated in the table, replace the back-up light switch.
am6zzw00002730