ANTENNA FEEDER NO.4 REMOVAL/INSTALLATION

id092000813100

1.  Disconnect the negative battery cable.

2.  Remove the liftgate upper trim. (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION.)

3.  Disconnect the antenna feeder No.3.

am6zzw00003591

4.  Remove the connector in the direction of the arrow (2) shown in the figure while pressing the glass antenna terminal in the direction of the arrow (1).

5.  Remove the clip.

6.  Remove the bolt.

7.  Remove antenna feeder No.4.

8.  Install in the reverse order of removal.