EVAPORATIVE CHAMBER INSPECTION [SKYACTIV-G 2.5T]

id0116q4804700

1.  Remove the evaporative chamber. (See EVAPORATIVE CHAMBER REMOVAL/INSTALLATION [SKYACTIV-G 2.5T].)

2.  Blow air flow port A and verify that there is air flow.

am6xuw00005668

•  If there is no air flow, replace the evaporative chamber. (See EVAPORATIVE CHAMBER REMOVAL/INSTALLATION [SKYACTIV-G 2.5T].)

3.  Verify that there is no deformation or cracking of the evaporative chamber.

•  If the exterior is no normal, replace the evaporative chamber. (See EVAPORATIVE CHAMBER REMOVAL/INSTALLATION [SKYACTIV-G 2.5T].)